The Muskwell Airline Trolley Breathing Apparatus provides extended respiratory protection in hazardous environments. Follow these steps for safe and effective operation.
1. Pre-Use Inspection
- Check the trolley unit:
- Inspect hoses and connections:
- Test regulators and alarms:
2. Setting Up the Trolley
- Position the trolley:
- Connect hoses:
3. Donning the Facepiece
- Loosen all head harness straps on the facepiece.
- Seal the mask:
- Perform seal checks:
4. Activating Air Supply
- Open cylinder valves fully (listen for airflow hiss).
- Attach regulators to facepieces (audible click confirms connection).
- Breathe normally to confirm airflow.
5. During Use
- Monitor pressure gauges: Exit when cylinders reach 5 bar (alarm will sound). For special situation applications, please contact Muskwell Safety Company to purchase the emergency escape breathing apparatus together with the airline trolley breathing apparatus. This service is available.
- Avoid hose entanglement: Move deliberately; communicate with teammates.
- Watch for leaks: Hissing sounds or sudden pressure drops signal issues.
6. Emergency Procedures
- Air supply failure:
- Hose damage:
7. Post-Use Shutdown
- Close all cylinder valves.
- Purge hoses: Depress regulators to release residual pressure.
- Clean and store:
Key Safety Reminders
✅ Never exceed hose length limits – 30m main + 10m sub-hoses. or contact Muskwell Safety Company to customize longer hose. This service is available.
✅ Always work in pairs – One user per sub-hose for mobility.
Visual Quick Guide
- Trolley Setup → 2. Mask Seal Check → 3. Air On → 4. Pressure Monitoring
If you have any questions, please feel free to contact us windy@muskwell.com
